SX SeriesInstalled SoundLive Sound

SXP118

1 x 18" Powered Portable Subwoofer

SXP118
Where to Buy or Rent

The SXP118 is a compact, high-performance subwoofer that extends the low frequency operating range of a CDD-LIVE! full-range system to 40Hz — providing exceptional low frequency impact and increasing headroom. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure. The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. With a maximum SPL capability of 135dB peak at 1 metre, the SXP118 is the ideal subwoofer for theatre and portable live sound applications, as well as premium installations that require the maximum output from a compact enclosure.

Features

  • Compact, self-powered subwoofer
  • 1 x 18” (460mm) driver with 4” (100mm) voice coil
  • Onboard Class D amplification and DSP
  • Dante™ Digital Audio networking
  • Global mains operation with Power Factor Correction
  • Tour-grade plywood enclosure with flying inserts
  • IP24 rating option with rain cowl

Applications

  • Live sound reinforcement
  • Theatre sound
  • Corporate AV events
  • Fixed installations in concert halls, ballrooms and HoW
  • Bars and clubs
  • Outdoor restaurant, bar and hotel entertainment areas
  • Concourses and Theme Parks

A self-powered system, the SXP118 incorporates a Class D amplifier, DSP and Dante™ digital audio networking — simplifying set-up, enhancing control and eliminating amplifier racks. The onboard amplifier delivers 2000W peak output to the driver, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.

For simple set-ups, ‘plug-and-play’ presets for operation with the CDD-LIVE 8, CDD-LIVE 12 or CDD-LIVE 15 — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. Additional presets provide the appropriate settings for the rear-facing subwoofer in a cardioid pair.

As an alternative to its analogue inputs, the SXP118 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run.

The enclosure is constructed from multi-laminate plywood with a durable polyurea coating and equipped with a perforated Zintec grille, twin grab handles, skids, M10 flying inserts and a threaded pole socket.

The product is supplied as standard without cabinet wheels, but they are available as an accessory.

By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Links
User guide Brochure Datasheet
Specification
Acoustics
TYPE Compact, direct radiating powered subwoofer
FREQUENCY
RESPONSE (3)
47Hz – 150Hz ±3dB, -10dB @ 41Hz
DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet, waterproof cone
INPUT SENSITIVITY -20dBu for 100dB SPL (CDD12/15 pre-set)
-13dBu for 100dB SPL (CDD8 pre-set)
MAXIMUM SPL (4) 132dB continuous / 135dB peak
DISPERSION Omnidirectional / or Cardioid (paired)
CROSSOVER Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired)
Module
Audio input
CONNECTORS Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE 20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL 24.6 Vpp (+21dBu), over voltage protected
Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct LPF
Up to 200ms input delay
Pre-set selection via rear panel switch
Network
CONNECTORS 2 x Neutrik® Ethercon
PROTOCOLTCP/IP and UDP/IP
Amplifier Module
TYPE 2 channel switch-mode, class D,
Bridged Tied
PEAK OUTPUT POWER 2000W total
AVERAGE EFFICIENCY 89%
COOLING External fan
MAXIMUM AMBIENT TEMPERATURE 40°C (104°F) for full output
Power Supply
TYPE Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR > 0.98
NOMINAL POWER CONSUMPTION 550W
MAINS CONNECTOR Neutrik® Powercon True1
Mechanical
ENCLOSURE Extensively braced multi-laminate plywood.
FINISH Durable Polyurea Coating
PROTECTIVE GRILLE Black perforated Zintec
FITTINGS Two skids on base, with mating channels on top
16 x M8 inserts for optional castors
M20 top-mounted thread plate for pole mounting
16 x M10 mounting points
2x Bar handles, 1 on each side
4x fittings for optional transit cover
IP RATING IP24 factory option available
DIMENSIONS (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors)
(W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors)
WEIGHT 46.5kg (103lbs) w/o castors 50kg (110lbs) with castors
Architectural Specs
Martin Audio SXP118

The loudspeaker shall be a self-powered subwoofer consisting of a 18” reflex-loaded, long-excursion, low frequency transducer. The on-axis frequency response shall be 47Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 135dB peak at 1 metre.

The loudspeaker shall incorporate a Class D amplifier module which shall deliver a total of 2000W peak output to the transducer and include onboard DSP and networking capabilities for remote control and monitoring. The loudspeaker shall be Dante™ enabled for Audio over IP. Its power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC.

Audio connectors shall be male and female XLR type and the AC power connector shall be a Neutrik® Powercon True1. Network connectors shall be Neutrik® Ethercon RJ45 type.

The loudspeaker enclosure shall be constructed from multi-laminate plywood with a textured polyurea coating.

The drivers shall be protected by a perforated Zintec grille and the enclosure shall be fitted with a threaded pole-mount plate, grab handles, skids and flying inserts. An IP24 rating version with an Input Board cover shall be available as a factory option.

Dimensions excluding castors (W x H x D) shall be 600mm x 507mm x 632mm (23.6in x 20in x 24.9in) and weight shall be 46.5kg (103lbs).

Dimensions including castors (W x H x D) shall be 600mm x 507mm x 760mm (23.6in x 20in x 29.9in). Weight shall be 50kg (110lbs).

The loudspeaker shall be the Martin Audio SXP118.

Available in this Series

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0